Aluminum Rail 2 metres, alu brushed

Aluminum Rail 2 metres, alu brushed
The "Click Rail" is for hanging frames.
It is suitable for galleries and exhibitions as it allows for quick replacement of frames without having to drill holes in the wall.

The "Click Rail" rail is made of aluminum and is 25mm high and 8mm wide.
It supports a maximum weight of 30 kg for each metre.
It exists in 3 versions:
1) Matt white color which can be painted to match wall color. To be exact, it is white RAL 9016 which is the code for this shade of white according to the RAL color scale.
2) Brushed aluminum finish
3) White color. To be exact, it is white RAL 9010.

Each of the 3 versions is available in two lengths: 2 meters and 3 metres.

To install the rail, you must first fix the connectors to the wall (which must be ordered separately). They come in two types:
JS1D code if the wall surface is smooth (50pcs)
JS1E code if the wall surface is uneven (50pcs)

The connectors must be fixed to the wall using the screws and relative dowels.
Code JS1CV = Screws in packs of 200 pieces
Code JS1CT = Dowels in packs of 100 pieces

A connector is recommended every 40 cm. Care must be taken that the connectors are perfectly aligned horizontally.
A connector must also be fitted at the connection point between one rail and another. In fact, the connectors are used not only for fixing the rail to the wall, but also for joining the rails together.
The rail is then applied by pressure over the connectors.
At the ends of the rail it is possible to apply the closing caps.

There are also corner connectors in case the rails are perpendicular to each other.

Aluminum Rail 2 metres, alu brushed