- Code:
JS1D
Clips for JS1 for even walls - Pack 50 pcs
- Net weight: grams 119 - Gross weight: grams 127
Clips for JS1 for even walls - Pack 50 pcs
The connectors have the dual function of fixing the Click Rail track to the wall and of connecting multiple rails together.
Connectors come in two types:
JS1D code if the wall surface is smooth (50pcs)
JS1E code if the wall surface is uneven (50pcs)
The connectors must be fixed to the wall with the screws and relative dowels.
Code JS1CV = Screws in packs of 200 pieces
Code JS1CT = Dowels in packs of 100 pieces
The recommended distance between one connector and another is about 40 cm.
Care must be taken that the connectors are perfectly aligned horizontally.
The rail is then fixed by pressure on the connectors by inserting it from top to bottom.
A connector must also be fixed to the wall at the connection point between one rail and another. In fact, the connectors are used not only for fixing the rail to the wall, but also for joining the rails together.
Connectors, screws and dowels are not supplied with the rails. They must therefore be ordered separately.