Cramp brass ferrules, diam. 2.5 mm - Pack 200
  • Code:

    PS25

  • Cramp brass ferrules, diam. 2.5 mm - Pack 200

  • Net weight: grams 40 -  Gross weight: grams 44

Cramp brass ferrules, diam. 2.5 mm - Pack 200
Brass ferrules, approximately 10 mm long.
Used to block the steel wire when the frame is hung with this system (more information can be found in the steel wire technical sheet).
To tighten the nuts you can use a normal pliers or a more professional and rational pliers manufactured specifically for this use (code CRP9) and which also serves to cut the steel wire.

The system of hanging frames with a steel wire fixed on the two vertical sides of the frame is widely used in America and Great Britain.
With this system you don't see any hangers (which can sometimes be unsightly). However, the disadvantage remains that the frame remains detached from the wall by a few millimetres. The frame remains slightly inclined, but this effect is sometimes deliberately sought.

Ferrules are available in these formats:

Code Diameter Pack Suitable for wire
--------------------------------------------
PS25 mm 2.5 200 pcs PS2 or PS3
PS25T mm 2,5 1000 pcs PS2 or PS3

PS35 mm 3.5 200 pcs PS4
PS35T mm 3,5 1000 pcs PS4

PS45 mm 4.5 200 pcs PS5 or PS6
PS45T mm 4.5 1000 pcs PS5 or PS6

Cramp brass ferrules, diam. 2.5 mm - Pack 200