- Code:
TS18
School print press 180 mm
- Net weight: kg 7,00 - Gross weight: kg 7,00
School print press 180 mm
Range of school etching presses for manual calcographic print, suitable for school use and for beginners. Solid steel rollers with adjustable height.
Come with metal plate.
Felt must be ordered apart.
Two models are available:
Gravure printing press, especially suitable for school use and for beginners.
It consists essentially of two rollers of solid steel adjustable in height.
The lower roller is driven by a crank while the upper roller is used to give pressure. Between the two rollers is inserted a support plane metal that is dragged by the rotation of the roller.
Above the floor is placed the engraved plate inked, the paper moistened that will receive the press and the felt which distributes the pressure evenly.
The felt is to be ordered separately (code TS18F).
Specifications of the press TS18:
• Dimensions: Length 25 cm - Width 23,5 cm - Height 17 cm
• Length of the rolls 18 cm - Diameter 3,5 cm
• The supporting galvanized steel 3 mm thick
• Size of the supporting surface: 18,6 x32 cm
• Dimensions with packaging: 34x22x20 cm
• Weight: 6 Kg